Công ty TNHH Công nghệ và Giải pháp INFINITY
TPT-8020A Cable Tester
| General | |
| Size | 134×74×46mm |
| Weight | 300g |
| Display | 128×64 LCD |
| Operation mode | Keyboard |
| Interface | RJ45 |
| Battery | 9V |
| Operation time, cable testing without backlight | 50 hours |
| Operation time, network testing without backlight | 15 hours |
| Testing | |
| Cable length test range | 1 to 457 meter |
| Single end measurement | Support |
| Adjust the length parameter | Support |
| Wiremap testing | Support |
| Cable faults detection | Opens, shorts, split pairs, miswires |
| Simultaneous cable testing | 8 lines with 8 remote ID |
| Tone generation | 4 distinctive tones |
| Ping testing | Display packet loss |
| DHCP testing | Display acquired IP, gateway and DNS server |
| Net Scan | Display searched host information |
| Port identification | Display telephone voltage and network attribution |
Cable Test
- Length measurement: twisted-pair, phone line, coax and wires, etc.
- Wiremap testing: display wiremap, conduct tests of STP/UTP and diagnoses faults for shorts, opens, reversals, miswires and split pairs and perform cable testing per T568A/B standard
- Tone generation: generate up to 4 distinctive tones for tracing cables
- Port identification: identify port and jack type, such as telephone and Ethernet, with speed and duplex information, up to 1000Mbps
Network testing
- Flashing port LED to locate a hub or switch port
- Ping test and packet loss detection
- Support static and DHCP dynamic IP configuration
- Net scan to verify active host quantity in the subnet and display IP and MAC Address
Others
- Auto-off for power saving
- Backlight LCD display, easy to operate even in the darkness
- Comprehensive functions: support cable testing and network testing
- Tone tracing: locate the cable on DDF without sorting out cables
- Net Scan: fast scan all of the active hosts in the LAN
- Test several cables simultaneously by selecting multi-remote ID
