Công ty TNHH Công nghệ và Giải pháp INFINITY
PROWARE FC SAN - EP-2243S1/D1-F8S6 /2U 24Bays 8Gb FC – 6Gb SAS Redundant RAID Subsystem
| Model | EP-2243S1/D1-F8S6 |
| RAID Controller | 8Gb FC – 6Gb SAS |
| Controller | Single or Redundant |
| Host Interface | Four / Eight FC-AL (8 Gb/s) |
| Disk Interface | 6Gb/s SAS, 6Gb/s SATA |
| SAS expander | One / Two 6Gb/s SAS (SFF-8088) |
| Capacity |
|
| - Direct Attached | 24 Disks |
| - Expansion | Up to 288 Disks |
| Processor Type | 800MHz Dual Core RAID-On-Chip processor |
| Cache Memory | 1GB ~ 4GB / 2GB ~ 8GB DDR3-1333 ECC Registered SDRAM |
| Battery Backup | Optional |
| Management Port support | Yes |
| RAID Features |
|
| RAID level | 0,1,10(1E), 3, 5, 6, 30, 50, 60 and JBOD |
| Array Group | Up to 128 |
| LUNs | Up to 128 |
| Hot Spare | Yes |
| Drive Roaming | Yes |
| Online Rebuild | Yes |
| Variable Stripe Size | Yes |
| E-mail Notification | Yes |
| Online capacity expansion, RAID level /stripe size migration | Yes |
| Online Array roaming | Yes |
| Online consistency check | Yes |
| SMTP manager and SNMP agent | Yes |
| Redundant Flash image | Yes |
| Instant availability and background initialization | Yes |
| S.M.A.R.T. support | Yes |
| MAID 2.0 | Yes |
| Bad block auto-remapping | Yes |
| Enclosure |
|
| Platform | Rackmount |
| Form Factor | 2U |
| # of Hot Swap Trays | 24 (2.5”) |
| Disk Status Indicator | Access / Fail LED |
| Backplane | SAS2 / SATA3 Single BP |
| # of PS/Fan Modules | 400W x 2 w/PFC |
| # of Fans | 2 |
| Power requirements | AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz |
| Environmental |
|
| Relative Humidity | 10% ~ 85% Non-condensing |
| Operating Temperature | 10°C ~ 40°C (50°F ~ 104°F) |
| Physical Dimension | 559(D) x 483(W) x 88(H) mm |
| Weight (Without Disk) | 14 / 15 kg |
※ Supports RAID levels 0, 1, 10(1E), 3, 5, 6, 30, 50, 60 and JBOD
※ Supports online Array roaming
※ Online RAID level/stripe size migration
※ Online capacity expansion and RAID level migration simultaneously
※ Support global and dedicated hot spare
※ Online Volume Set Expansion
※ Support multiple array enclosures per host connection
※ Greater than 2TB per volume set (64-bit LBA support)
※ Greater than 2TB per disk drive
※ Supports 4K bytes/sector for Windows up to 16TB per volume set
※ Disk scrubbing/ array verify scheduling for automatic repair of all configured RAID sets
※ Login record in the event log with IP address and service (http, telnet and serial)
※ Support intelligent power management to save energy and extend service life
※ Support NTP protocol to synchronize RAID controller clock over the on-board LAN port
※ Max 128 LUNs (volume set) per controller
※ Transparent data protection for all popular operating systems
※ Instant availability and background initialization
※ Multi-path & load-balancing support (Microsoft MPIO)
※ Automatic synchronization of firmware version in the dual-active mode
※ Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
※ Supports hot spare and automatic hot rebuild
※ Local audible event notification alarm
※ Redundant flash image for high availability
※ Real time clock support
